The product itself is good. everything was packed neatly, nothing was damaged. The cabinet was easy to assemble when you read the manual and lay out the pieces. I assembled this in a little over 2 hours. My only thing is, do your best not to over tighten the screws and pieces as they are quite flimsy. So I find myself torquing the screws and they don't stay tighten but, spinning with every turn. So what is my advice, tighten it just enough that it doesn't move but, not over torque.
It says this in the manual not to use an electric screwdriver and not to use too much force as the board is easy to break. This is true for eccentric rods, wooden dowels ( some were not tight enough when placed in) screws, and cam locks can easily break.

Knowing all this they give you an extra 2-3 pieces more for parts you might break and you will see the piece count plus extras in the manual.

Other than that, when it's fully assembled, it didn't feel like it was going to fall apart. Although it did mention to tighten the parts down from time to time. Maybe this is common for any piece of furniture that you assembled but, I never had to unless it's quite obvious.

When it's fully assembled, it's very nice and I like the details. The mirrors are protect with an adhesive which you will be removing at the very end. As long as you follow the manual, you can't go wrong. Do not assemble the mirror until you mount the cabinet on the wall.

This will make the cabinet much heavier as the gross weight is roughly 65 lbs and net weight which is the complete assembly is 55.56 lbs (about there) so install the mirrors last after mounting the cabinet on the wall!

You'll thank me later. Side note, mirrors correspond to the numbers and when you install each mirror, make sure to pay close attention to the directions.
(F) marked hinges are strictly for left and right side mirrors. (G) Hinge is strictly for the middle. Pay close attention also before attaching the hinges to the cabinet itself that you maximize the extension of the screw itself. It sounds confusing but, watch the video before attempting this that is linked in the manual and you'll find out why your hinge isn't reaching to the pre-drilled holes of the cabinet and another screw is to adjust the height up or down so you can align it vertically.

Crucial steps and when all is said and done. You'll be happy you paid attention lto those steps as it will save you many headaches.

The finished product looks great and even the handyman who helped installed the cabinet and family members said that they loved the cabinet.

There's enough room to stack things. I stack things on the highest shelf things I won't use very much and the bottom I use the most and same with the 2nd shelf. It's worth the effort!

Easy assembly. Nice quality